Wires
Wire AISI 305 (1.4303)
Austenitic wire with low work hardening for deep drawing
| Grade | AISI 305 / W.Nr. 1.4303 |
|---|---|
| Standard | EN 10088-3 |
| Wire diameter | 0.020–5.00 mm |
| Type | soft (annealed) / half-hard / hard |
| Supplier | Own stock (imported from India/China) |
| Lead time | approx. 6 months |
Material test certificate EN 10204 2.2/3.1
Technical data
Technical data
Chemical composition [%]
| C | ≤ 0.08 |
|---|---|
| Cr | 17.0–19.0 |
| Ni | 10.5–13.0 |
Mechanical and other properties
| Surface finish | matt / bright |
|---|---|
| Winding | coils, spools, drums, rosettes |
Low work hardening during drawing, suitable for woven mesh requiring repeated forming of the wire.
Request a quote: Wire AISI 305 (1.4303)
Sales department
Usually within 24 hours, depending on the complexity of the specification
+420 224 234 322 pragointer@pragointer.cz